During debugging, special attention should be paid to safety. Our grinding wheels are ground inside a sealed protective cover, so we have reduced the danger. However, this does not mean that there is no possibility of danger. Especially at the feeding port, special attention should be paid to: 2.1 When loading, it is necessary to avoid collision between the glass and the machine
2.2 When loading, do not reach into the chain to prevent fingers from being pinched or drawn into the machine
2.3 When the grinding wheel is rotating and there is glass in the conveyor belt, it is prohibited to change the size of the glass
During the debugging process, it is not allowed to open the sealing protective cover for any reason when the grinding wheel is rotating
2.5 Before debugging, the safety of the power supply must be checked
2.6 When placing glass on the conveyor, it should be prevented from injuring people due to debris generated by glass tipping
3. Judgment of debugging results
After debugging, our machinery should have a bright, smooth surface and no obvious knife marks after glass finishing
Article by: Glass bilateral machine www.cnyuanbo.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website
